Water Purification

A Unique, independent, integrated water purification system designed to produce high quality drinking water per World Health Organization standards. Produces potable water from any contaminated water source

Purification Capacity

Fresh water source: 22,000 Gallons Per Day

Sea water source: 5,500 Gallons Per Day

WATER Purification Vehicle Primary features

  • Mobile, self-contained independent and automatic
  • Lightweight: 3,395 pound (1,540 Kg)
  • Connects to any possible water source (rivers, lakes, oceans, brackish water, wells, highly turbidity water source)
  • Produces drinking water according to WHO water standards
  • Independent energy source
  • Control & Analyzers for continuous and stable supply drinking water
  • Resistance to all weather conditions
  • Transferability and high level of safety
  • Plug & Play configuration
  • Deployment: less than 30 minutes, by 2 person
  • Integrated water storage tank 265 gallon (1000 liter) Up to 2650 gallon (10 m3)
  • Speed: 55 MPH (90 KPH)
  • 12V low voltage system
  • Small dimension; easy to store, easy to carry and ship
  • Advanced control system: reduces the need for operator attendance
  • Produces drinking water from any contaminated water source
  • High transferability
  • Purification Capacity: Sea Water Source: 5500 GPD (23 m3)
  • Fresh Water Source: 22,000 GPD (92 m3)
  • Operating time 80 hours without refueling
  • Integrated water storage tank
  • Integrated water distribution system
  • Capable of interfacing with local distribution system and source
  • Range up to 1000 mile (1600Km)
  • Primary Filtration System
  • 1St Disinfection System Using Chlorine Reactor
  • Submersible Raw Water Pump
  • 50 Micron Filtration
  • Heat Exchanger
  • Activated Carbon Filtration
  • Pre Treated Water Pump
  • 25 Micron Filtration
  • Ultra-Filtration
  • 5 Micron Filtration
  • Reverse Osmosis
  • 2nd Disinfection System Using Chlorine Reactor
  • Storage System
  • Supply System
  • Micron Filtration/Activated Carbon
pH, standard units5.0 – 10.0
Specific Conductance, at 25°C, μS/cm10 – 45,000
Alkalinity, “M”, as CaCO30 – 2,8
Sulfur, Total, as SO40-15
Chloride, as Cl0-2,500
Hardness, Total, as CaCO30-1,500
Calcium as Ca0-500
Magnesium as Mg0-500
Barium, Total, as Ba0-50
Free Chlorine0-15
Iron, Dissolved, as Fe30
Nitrite, as NO2400
Fluoride, as F12
CO2400
Total Organic Carbon (TOC)5
Dissolved Organic Carbon (DOC)10
Turbidity, NTU30
Feed Water SourceAny Source
COD3
BOD53
Total Suspended Solids120
Total Dissolved Solids45,000
Influent Flow Data Min. Max.
Inlet Flow rate (m3/hr)2.5 - 5
Pressure (bar)0 - 3
Temperature (°C)3 - 37
Average Daily Flow (m3)20 - 80
Maximum Daily Flow (m3)100
Maximum Monthly Flow (m3)580 - 2900
Peak Hourly Flow5
Operation Basis
Hours per day23
Days per year355
System Redundancy1 X 100%
Parameter ­ Product Water Value
Flow (m3/hr)
Sea Water Source1
Fresh Water Source4
Pressure (minimum bar)1.5
pH, standard units6.5 ­ 7.5
Total Hardness as CaCO3, ppm25 ­ 125
Silica as SiO2, ppm Max0.2
Chloride as Cl, ppm Max0.5
Iron as Fe, ppm Max0.1
Turbidity (NTU)0.5
Total Dissolved Solids (TDS)150
ComponentsSizeMaterial
Filter Housing4 units
Diameter: 105mm, 308mm
Material : PP
Permitted Pressure: 6 atm
High ­Pressure Piping2 unitsRO Feed
Reject Outlet
Material : Duplex SS ­316
Feed Water Piping1 unit
Diameter: 50mm
Flat in A Cylinder Design
Materials : PN 6, PVC
Permeate Manifold and Piping1 unit
Diameter: 32mm
Reinforced Sphere in a Metal Coil
Materials : PN 6, PVC
High-Pressure Pump Internals1 unitMaterials : PN 6, PVC
UF2 units
Diameter: 230mm
Length:1250mm
Membrane area: 25m
Material : PESM
RO4 units
Diameter:105mm
Length:1016mm
Epoxy-coated Reinforced /FRP
Permitted Pressure: 68 atm
RO Membrane4 units
Diameter:105mm
Length:1016mm
Material : Polyamide
Permitted Pressure Load: 68 atm
Rigid Piping and ComponentsDiameter: 32mmBW
Materials : PP
Permitted Pressure:10 atm
Actuated Valve15 UnitsType: Ball valve
Material: PP
Compressed Air Operated
Source Water Pump1 UnitType: JABSCO Positive displacement
Material: Bronze\Neoprene
Straight Belt Driven
Raw Water Booster1 UnitType: JABSCO Positive displacement
Material : Bronze\Neoprene
Straight Belt Driven
High Pressure Pump1 UnitType: Plunger Positive displacement
Material : Duplex SS-904
12V Motor
Purified Water Reservoir (Integrated)1 UnitType: Flexible Bladder
Material : PVC
Volume : 3000 Liter
Purified Water Pump1 UnitType: Diaphragm Positive displacement
Material : PP
12V Motor
Dry Weight3,395 pound (1,540 Kg)
Length3,076 mm
Width1,778 mm
Height1,701 mm
Ground Clearance381 cm
Wheel Base2,921 mm
Safety:Fully welded roll cage and frame
ROPS certified
Low seating angle for maximum Occupant restraint
Four point safety harnesses
Aircraft grade aluminum skid plate protects the underside of the vehicle
Suspension4 Wheel Independent Suspension
Adjustable Dual-Coil Over Gas-Hydraulic Shocks
EngineDiesel 1400cc, Naturally Aspirated, 4 Cylinder
Liquid Cooled
Fuel TankOne 29 gallon (110 Liters) (Optional 2nd Tank)
TransmissionAutomatic ‘V’Belt CVT
Final drive: Doubler Roller Chains Encases in an Oil Bath
High - Low - Reverse Transfer Case
Differential Lock
Tires & WheelsFront: 25x8-12, 6 PLY, AT Tread
Rear: 26x12-12, 10 PLY, AT Tread
Aluminum Rims
Electrical System
(Incorporated in Water System)
12V 500 CCA Battery
80A Alternator
Horn
12V Power Socket
KC Headlights
LED Tail lights. Turn and Brake Lights
Brakes4 Wheel Power Assisted Disc Brakes
InstrumentationSpeedometer
Odometer
Voltmeter
Fuel
Temperature
Low Oil Pressure
Turn Signal
High/Low Beams
  • Spare tire
  • Winch
  • Doors
  • Towing hook
  • Mechanical tools
  • 150-300 hours maintenance kit
  • Personal safety equipment
  • Remote control system
  • Enclosed driver cab including climate control
  • GPS system
  • Rear / Front safety TV Cam